Hunter 23.5

The Hunter 23.5 is an American trailerable sailboat that was designed by the Hunter Design Team and was built between 1992 and 1997, but it is now out of production.

The Hunter 23.5 is a small recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop rig with a full batten mainsail and a 110% genoa, a raked stem, a walk-through reverse transom, a transom-hung rudder controlled by a metal tiller and a centerboard. It displaces 2,000 lb (907 kg) and carries 1,000 lb (454 kg) of flooding water ballast. The ballast is drained for road transport. The boat has a draft of 5.50 ft (1.68 m) with the centreboard extended and 1.50 ft (0.46 m) with it retracted, allowing beaching or ground transportation on a trailer.

The boat is normally fitted with a small 3 to 6 hp (2 to 4 kW) outboard motor for docking and maneuvering. The fresh water tank has a capacity of 5 U.S. gallons (19 L; 4.2 imp gal). Factory standard equipment supplied included a stove, sink, cooler, portable head, a dinette table that can be fitted in the lower deck and the cockpit, outboard motor mount, life jackets, an anchor and a fog bell. Optional equipment included a galvanized highway trailer, a 5 or 8 hp (4 or 6 kW) outboard motor and a canvas companionway cover.

The design has sleeping accommodation for six people, with a double "V"-berth in the bow cabin, two straight settee berths in the main cabin and an aft cabin with a double berth on the starboard side. The galley is located on the port side abeam the companionway ladder. The galley is "L"-shaped and is equipped with a single-burner stove and a sink. Cabin headroom is 54 in (137 cm).

The design has a PHRF racing average handicap of 243 with a high of 249 and low of 231. It has a hull speed of 6.2 kn (11.48 km/h).

Source: Wikipedia. Image Credit: Smart Marine Guide